Acrel new product ADW600 multi circuits wireless power meter

Product Introduction：

ADW600 multi-circuit power metering module is mainly used to measure the three-phase active power of low-voltage networks. It has the advantages of small size, easy installation, and rich functions. The product adopts a modular design, including voltage module, current module, switch module, temperature measurement and leakage module, etc. The modules are connected by network cables and can support multi-circuit splicing. It is suitable for multi-circuit metering scenarios on the low-voltage side, especially for power transformation needs.

Keywords:

Power meter , Multi-channel , AC , Three phase ,wireless ,4G , Wifi

Product Parameters:

Model	Function
ADW600-M	Data acquisition and remote transmission (4G/Ethernet/WIFI)
ADW600-U	Voltage measurement and sampling
ADW600-I	Active energy measurement (forward and reverse),
	Four-quadrant reactive energy
	Voltage, current, power factor, frequency, active power, reactive power, apparent power
	Total harmonic content, sub-harmonic content (2nd to 31st order)
ADW600-K	Active pulse output
ADW600-TL	4DI, 2DO

ADW600-U	Rated voltage	3×57.7/100V，3×220/380V，3×100V, 3×380V
	Voltage accuracy	0.5%
	Reference frequency	45-65Hz
	Power consumption	Each phase<0.5VA
ADW600-I	Input current	D10：0.03-0.15(6)A，D16：0.8-2(100)A，D24：3.2-8(400)A，D36：4.8-12(600)A
	Active energy accuracy	B class
	Energy pulse width	80±20ms
	Active pulse constant	D10：6400imp/kWh，D16：400imp/kWh，D24：100imp/kWh，D36：60imp/kWh
	Power consumption	Each phase<1VA
ADW600-K	Switching input	4 passive inputs, built-in DC12V power supply
ADW600-K	Switching output	2 passive outputs, capacity AC230V/DC30V, 3A
ADW600-TL	Temperature measurement	12 temperature measurement, accuracy ±2℃, 12 temperature measurement wires as standard
ADW600-TL	Residual current measurement	4 residual current measurement, input maximum 1mA, accuracy 1%, residual current transformer needs to be purchased separately