AMC16Z series multi-loop acquisition module is independently designed to meet the needs of the increasingly high precision power distribution management requirements of the data center. It suitable for various all-round intelligent monitoring of terminal distribution equipment.
● Monitor the full-power parameters of the A+B double-channel DC feed circuit
● Measurement Voltage,current,power,electric energy,ambient temperature and humidity
● 2nd~63rd&Total Harmonic
● ±12V output (only power supply to the feed circuit module supporting Hall sensor).
● 1-way temperature and humidity detection
DC incoming line
Instrument model |
AMC16Z-ZD |
||
Measured parameters |
Voltage,current,power,electric energy,ambient temperature and humidity |
||
Bus voltage |
Rated |
48VDC,240VDC,336VDC |
|
Measured range |
±20% |
||
Overload |
Instantaneous voltage 2 times per second |
||
Current incoming line circuit |
Rated |
5V (Hall sensor,powered by AMC16Z-ZD ±12V) |
|
Overload |
Duration 1.2 times,instantaneous 10 times/second |
||
Temperature and humidity |
Temperature range |
-40℃-+99℃ |
|
Humidity range |
20%-90% |
||
Measurement precision |
Incoming line |
Voltage/current Class 0.5,power/electric energy Class 1 |
|
Temperature |
±1℃ |
||
Humidity |
±5% |
||
Auxiliary power |
Signal take electricity(≤15W) |
||
Environment |
Temperature |
Work: -15℃ ~ 55℃ Storage: -25℃ ~ 70℃ |
|
Humidity |
Relative humidity ≤93% |
||
Altitude |
≤2500m |
||
Switching output |
2 way 3A 250VAC /3A 30VDC |
||
Switching input |
6 way dry contact |
||
Communication |
RS485/Modbus-RTU |
||
Installation |
DIN35mm guide rail or floor mounted |
||
Protection grade |
IP20 |
||
Pollution levels |
2 |
||
Security |
Insulation |
All terminals and the insulation resistance between the conductive pieces not below 100 m Ω |
|
Pressure |
A circuit voltage and current signal // B circuit voltage and current signal // Switching output // other ports should meet AC2kV 1min between pairs,switching input and other ports should meet AC0.5kV 1min,leakage current should be less than 2mA,no breakdown or flash over phenomenon. |
||
Electromagnetic compatibility |
Anti static interference |
Class 4 |
|
Resistance to rapid transient pulse groups |
Class 3 |
||
Resistant to surge interference |
Class 4 |
||
Radio frequency electromagnetic radiation |
Class 3 |